Expert Answers about Chevrolet Automotive Tools
- Compatibility of Bully LED Tailgate Light Strip on 1996 Dodge Pickup Truck with Spare Tire Access
- The Bully Tailgate light strip - Stop, Tail, Turn, Reverse # BLS-1103 installs with automotive-grade 3M tape. There is some adjustability in the mounting to allow access to your spare tire tool input when installed with that in mind on your 1996 Dodge Pickup.
view full answer... - Fit of Bully Adjustable Ladder Rack # CG-902 on 2011 Chevy Silverado
- According to my contact at Pilot Automotive, the Bully Ladder Rack, part # CG-902 can indeed be installed on a truck with a bed liner. You would need to drill through the bed liner and into the top of the bed rail to attach the ladder rack (assuming that the bed liner covers the top of the bed rail). If you have a tool box in your bed that covers the top of the bed side rail, you might need to move the box rearward a few inches to allow clearance for the rack upright.
The rack would work...
view full answer... - Recommended LED Light for Interior of Trailer Tongue Tool/Storage Box
- The Command LED Bullet Clearance Light # 328-003-183CW will mount fine in a trailer tongue tool or utility box with 14- or 16-gauge material but I have another item to suggest that you might find to be easier to install and also more effective for your application.
The Access LED Light # A80312 is an 18-inch LED strip light that has its own battery power pack that uses 3 AA batteries.
This item means no drilling or cutting into your box, no need to wire anything to the vehicle and since...
view full answer... - Will the Derale Transmission Cooler Kit # D13501 Fit on a 2002 Hyundai Sante Fe Towing 2,000 Pounds
- The Derale Transmission Cooler Kit, # D13501, would be a great choice for the application you have described. The only gotchyas may be the transmission lines themselves. We do not have any reliable information on which fittings are used on Hyundai vehicles at this time.
You should be able to use the insta-dapt fitting included with the cooler for installation. This part will install in the fitting coming out of the oem cooler in the radiator tank, and the return line from the new trans...
view full answer... - Compatibility of BOLT Lock Cylinder on 2007 Chevy Avalanche LT Toolbox
- I can help you find the right replacement lock cylinder for your 2007 Chevy Avalanche LT Toolbox.
If your current lock cylinder can be removed from your Avalanche's toolbox then you will need the Late Model GM Key Cylinder from BOLT # BL692915. Usually, if the lock is going to be able to be replaced it will have a thin nut on the back of the cylinder on the interior of the toolbox that can be loosened and removed. I've included an image to show you what I'm talking about.
If you happen...
view full answer... - Will Installing a Trailer Hitch Void the Warranty on a 2011 Dodge Ram 1500
- Installing a trailer hitch like the Draw-Tite hitch, # 75662, will not void your warranty on your 2011 Dodge Ram 1500. Consumers of aftermarket products are protected by the Federal Magnusson - Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the problem in question.
You do not have to take the truck and hitch...
view full answer... - Parts Needed To Install Draw-Tite Trailer Hitch Receiver 76170 On 2018 Honda Odyssey
- Thank you for your service!
To install the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76170 you were looking at on your 2018 Honda Odyssey I recommend the Nylon Tube Brush - 1/2" # 814092 to clean out the weld nuts to remove and debris that could cause a bolt to strip. Also if your Odyssey has the hands free lift gate you will need a new sensor bar which you can get from your local Honda dealer.
Now depending on what you plan on using the trailer hitch...
view full answer... - Will the Curt C99FR Hitch for a 2020 Toyota Highlander Still Allow Operation of Hands Free Lift Gate
- While the rear lift gate sensor will likely not function in the area directly above the receiver of a hitch, it will still function to either side of it, so you can install a hitch on your 2020 Toyota Highlander. We recommend using the Curt # C99FR, which has a 2" receiver that is perfect for both towing and carrying accessories. In order to get a complete towing setup for your Highlander you'll also need a wiring harness, ball mount and hitch ball.
For wiring, I recommend using the #...
view full answer... - Will Roadmaster Falcon II Tow Bar Work With 2000 Jeep Wrangler With Double Tube U-Channel Bumper
- Okay, so let's start with the simple answer about compatibility - yes, you can use the Roadmaster Falcon 2 Tow Bar # RM-520 with your 2000 Jeep Wrangler so long as your Wrangler has the appropriate base plates. For this I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-521424-5 which the Falcon 2 is compatible with and will fit your U-Channel (also called a double tube) bumper.
As for the motorhome aspect, dinghy towing (flat towing) is traditionally done with motorhomes, but...
view full answer...
Go To Results